The quality of bathroom partition accessories directly determines the normal use of partition accessories. When installing partition accessories, we should grasp the installation points, select the appropriate partition accessories, and use the correct method to install the correct materials. This is the performance of being responsible for the users, so how to install partition accessories? Today we will introduce the installation and selection of accessories!
How to install toilet partition device in toilet:
Before the start of all equipment, other interior decoration processes can be stopped only after they are basically completed. During installation and positioning, they should be stopped strictly according to the requirements of design drawings.
The width of the upper limiting groove of the stainless steel glass door frame should be greater than 2 ~ 4mm, and the depth of the limiting groove can be injected with adhesive in the range of 20 ~ 30mm.
When wrapping the metal decorative surface, the polishing belt joint shall be placed at both ends of the device glass. The stitches are correct and vertical.
The positioning method of the glass door leaf for installing stainless steel glass door is to take out the upper part of the glass from the limiting slot on the top of the door frame, fix the lower part of the glass correctly, and align the middle line to make the device position of the two door leaves aligned. The two sides of heavy glass should be properly blocked the metal decorative strip of the door frame, sewed on the metal decorative strip of the door frame, and the decorative seam can not be seen inside and outside.
How to choose the partition device of public toilet?
As far as the use characteristics of public toilets are concerned, the floor of public toilets is always wet, and acidic urine is easy to corrode the parts contacting the floor. Aluminum and 202 stainless steel parts contact with acidic liquid for a long time, the surface is not corrosive enough, easy to spot or mold!
Modern people use more public toilets, toilet doors are basically equipped with automatic rotary hinge. If the toilet partition door is normally open, the hinge is easy to be deformed and broken. In addition, door locks and handles are easily damaged. The invention can avoid the above problems of nylon fittings. After the nylon fittings are produced, the moisture in the air can be absorbed, so that the parts are stronger and stronger, the service time is longer, the toughness is higher, and the use of nylon fittings basically does not need to worry.